Description
8051 USB Flash Memory Development Board
Flash micro-controllers are easy to program, which makes them suitable for rapid software development environments and educational uses. In the past, program code was usually downloaded via a serial interface, but nowadays many PCs (especially laptops) only have USB ports. This versatile Flash Board provides a solution to this problem. It is built around an AT89C5131A, which is an extended 8051-family micro-controller with an 80C52 core and a Full Speed USB port. As a sort of bonus, the IC has a complete update interface for downloading new firmware.
Technical Specification:
- 80C52X2 Core (6 Clocks per Instruction)
- USB 1.1 and 2.0 Full Speed Compliant Module
- 32-Kbyte On-chip Flash EEPROM In-System Programming through USB port
3-KbyteFlash EEPROM for Bootloader, 1-Kbyte EEPROM Data - Flash memory reliably stores program code even after 100,000 erase and program cycles with 10-year minimum data retention
Keyboard Interrupt Interface on Port P1 (8 Bits) - 34 general purpose I/O pins connected to 10pins header connectors for easy I/O pins access
- 4 Direct-drive LED Outputs with Programmable Current Sources: 2-6-10 mA Typical
- Industrial popular window Keil C compiler and assembler included (Eval. version)
Free Flip Windows software for easy program code down loading - Software bundle in CD-ROM, including tutorials, compiler/assembler, programming utilities, applications notes, 8051 based projects and examples programs
Related Link:
- HT-USB5130 Getting Started Manual
- Block Diagram
- FLIP Programmer for HT-USB5130
- 8051 Tutorial
- Keil C Compiler Version 7.50A
Application Examples:
8051 Learning Resources
- 8051 Embedded Programming in C- Book-I
- 8051 Embedded Programming in C- Book-II
- 8051 Final Word
- Systems Design and 8051
- 8051 base micro-controller projects
Our Local Outlet:
Others Resources:
Alarm Clock with HT-USB5130 Development Board.
Please fill in your email address to download this project Article.
[email-download download_id=”250″ contact_form_id=”248″]
