Description
Use this extension board to make the ESP12E/F breadboard friendly. All pins are easily laid out with 0.1″ spacing for standard 0.1” header connector. This extension board is populated with 3.3V~500mA LDO voltage regulator so that it can be directly power by 5V or 3V systems voltage.
Brief Data:
- Operating Voltage: 3~5V.
- ESP-12 / ESP-12E / ESP-12F compatible.
- On board 3.3V voltage regulator with 500mA current rating.
- 2x 8pin Male Headers included.
- 10k pull up resistor on CHPD for chip enable.
- 10k pull down resistor on GPIO2.
Package Included:
- 1x ESP12 adapter board with 3.3V LDO.
- 2x 8-pins male header connector.
Related Information:
Our Local Outlet:
