Description
This Arduino Motor Shield is designed based on L298P Power Motor Driver IC, a full- bridge motor driver. It can drive two seperate 2A DC motors or one 2A step motor. Motor speed and directions can be controlled separately. Also there are 6 connectors connected to Arduino analog pins for fast prototyping. An onboard buzzer can be activated when required for audible warning purposes. This Motor shield can be powered directly from Arduino or from external power source. It is strongly recommended to use external power supply to power the motor shield.
Brief Data:
- Driver: L298N Dual H Bridge DC Motor Driver
- Motor Driving Voltage: 8 ~ 35V (From Arduino or External Power Source)
- Peak Motor Current: 2Amp.
- Onboard Buzzer.
- Motor Direction LED indicators.
- Control signal input voltage range:
- Low: -0.3V ≤ Vin ≤5V.
- High: 2.3V ≤ Vin ≤
- Enable signal input voltage range :
- Low: -0.3 ≤ Vin ≤5V (control signal is invalid).
- High: 2.3V ≤ Vin ≤ Vss (control signal active).
- Maximum power consumption: 25W (when the temperature T = 75 ℃).
- Storage temperature: -25 ℃ ~ +130 ℃.
- Size: 68.5mm x 53mm x 12mm.
Related Information:
Our Local Outlet:
- lelong.com.my
- Shopee
