Description
This is a spacer that has an offset center (eccentric) 5mm x 0.8mm hole through it. It is used to tension V wheels against support material. You mount this in Ø7.14mm (0.281 dia.) hole. When you rotate it, it will move a V wheel mounted to it, allowing you to adjust the tension against the holding rail. Eccentric nuts provide adjustable preload between the V-Wheels and the aluminum rails, allowing for smooth and well constrained movement.
Brief Data:
- Mounting Hole (Outer Diameter): Ø7.14mm (0.281″).
- Spacer High: 6.00mm.
- Material: Stainless Steel.
- Center Bore Diameter: Ø5mm.
- Screw Type: M5.
Detail Specification:
Our Local Outlet:
