Description
This is a spacer that has an offset center (eccentric) 5mm x 0.8mm tapped hole through it. It is used to tension V wheels against support material. You mount this in Ø7.14mm (0.281″ dia.) hole. When you rotate it, it will move a V wheel mounted to it, allowing you to adjust the tension against the holding rail. Eccentric nuts provide adjustable preload between the V-Wheels and the aluminum rails, allowing for smooth and well constrained movement.
Brief Data:
- Screw Hole Size: M5.
- Mount Hole: Ø7.14mm (0.281).
- Spacer High: 8.00mm.
- Material: Stainless Steel.
Detail Specification:
Our Local Outlet: