Description
A stepper motor to satisfy all your 3D-Printer, robotics, Linear Motion projects needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 1.7A/phase with holding torque of >55Ncm, so that it could be driven easily with common motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery. The motors are supplied with a 100cm long power cable with a 4-pin Dupont female connector already fitted – ready to plug and print!
General Specification:
- Nema17 Bipolar.
- Number of Phase: 2.
- Step Angle: 1.8°.
- Phase Current: 1.7A.
- Holding Torque: >55Ncm.
- Resistance: 3.3Ω ±10%.
- Inductance: 2.8mH ±20%.
- Motor Body Length: 48mm.
- Number of Wire: 4/100cm Length.
- Shaft Diameter: Ø5mm D-Shape.
- Dielectric Strength: 500VAC/1-minute
- Mass: 300g.
Related Information:
Our Local Outlet:
